RT Ride Pro HP Height Sensor Upgrade, Self Levelling (ART30400036)

RidePro-HP Ride Height Sensors upgrade your existing RidePro E5 pressure-based system. The ultimate air suspension management system measures BOTH pressure and ride height. With the additionof RidePro-HP, ride height andspring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading. This is especially important for dynamic driving scenarios where quick transitions occur. Examples include high performance driving, sudden directional changes and panic stops. Pressure-only systems are goodat handling these load changes, but combined pressureand height systems work best. The complete RidePro-HP kit iseasy to install. The complete RidePro-HP kit includes: 4 ride height sensors, 4 ride height sensor linkage kits (with bendable linkage rods and rubber rod ends), group harness, 1/4" sensor bolts w/ Nyloc nuts & flatwashers, mounting tabs, Heat shrink tubes and Installation Guide.

Note: RidePro-HP sensors can only be used in conjunction with RidePro E5 Digital Control System.

Features:
- Works with RidePRO E5 pressuremeasurement for ultimate pressure and height accuracy
- Heavy-duty Ride Height Sensors
- Bendable Linkage Rods with Rubberized Rod Ends. Maximum
- Weatherproof connectors and wiring harnesses
- Can be added onto existing pressure-only system installations