Sensors

Part Number: 101-0045Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 101-0076Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 101-0199Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP t...

Part Number: 101-0164This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged application...

Part Number: 125-1000Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible wit...

AF989-05 - MASS AIR FLOW ALLOY WELD ONUniversal Fitment. Suits GM LS Style MAF SensorPart Number: AF989-05The Aeroflow Performance universal mass a...

IM3728 - INNOVATE EXHAUST CLAMPCast Stainless Steel Use With IM3737 Oxygen SensorPart Number: IM3728Patent-pending, Venturi-effect, tapped exhaust ...

AF49-1580 - BOSCH KNOCK SENSOR UNIVERSALBosch Part Number 0 261 231 188Part Number: AF49-1580This Bosch universal knock sensor is used in performan...

Part Number: 101-0046Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (N...

Part Number: 101-0034Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of eth...

Part Number: 101-0163 The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged a...

Part Number: 101-0162 The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated...

Part Number: 101-0077Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread

Part Number: 101-0320Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitab...

Part Number: 101-0080Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and Wiring Up to 150 PSI above at...

Part Number: 101-0280Hall effect sensor designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provi...

Part Number: 101-0165The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applic...

IM3888 - INNOVATE OXYGEN SENSORBosch LSU 4.9 5-wire, wide-band O2 sensorPart Number: IM3888Compatible with the LM-2, LC-2, and MTX-L, SCG-1, DLG-1,...

IM3884 - LC-2 WIDEBAND CONTROLLER KIT3ft with o2 SensorPart Number: IM3884LC-2: Complete Lambda Cable Kit (3 ft.). Includes: LC-2 Controller Bosch ...

IM3840 - INNOVATE PROGRAM CABLE (4 PINPart Number: IM3840The Serial Program Cable will allow you to connect the MTX series gauges, LM-2, LC-2 SCG-1...

BO0258017025 - 02 OXYGEN SENSOR LSU 4.992cm long lead approxPart Number: BO0258017025LSU "Broadband" Universal Sensor - as its name suggests the br...

AF72-1101 - SPEEDO SENSOR DELETE PLUGSuits Ford C4, C6, AOD and T-5, TKO, MagnumPart Number: AF72-1101Aeroflow Performance brings you this billet a...

MAP SENSOR ALLOY WELD ONSuits Bosch Map SensorsPart Number: AF989-06DThe Aeroflow Performance universal manifold absolute pressure sensor (MAP) alu...

FORD FG BARRA MAP SENSORBoschPart Number 0 261 230 283Part Number: AF49-1574This genuine Bosch Ford Barra Manifold Absolute Pressure (MAP) sensor i...

AF456-01BLK - PRESSURE SENSOR BLOCK BLACK3 x 1/8" NPT PortsPart Number: AF456-01BLKThe Aeroflow Performance Pressure Sensor Block is a must to prot...

AF989-05SS - MASS AIR FLOW S/S WELD ON BUNGUniversal Fitment. Suits GM LS Style MAF SensorPart Number: AF989-05SSThe Aeroflow Performance universal...

Part Number: 101-0116This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes: Link G4+/G4X Fur...

Part Number: 101-0117Used to install LSU 4.9 Wideband O2 sensor. Includes weld on bung and plug.Features: O2 Bung and Plug

Part Number: 101-0048Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA &...

Part Number: 101-0193Stainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT t...

Part Number: 101-0050Weld in Steel Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a...

Part Number: 101-0049Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount v...

Part Number: 101-0047Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-...

Part Number: 101-0186High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mat...

Part Number: 101-0025Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with al...

Part Number: 101-0146Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Inclu...