Accessories

Part Number: 101-0001Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatib...

Part Number: 101-0045Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 125-1000Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible wit...

Part Number: 101-0226The Link CAN Gauge is a compact OLED gauge for displaying real-time data from your Link ECU’s CAN stream. Supported parameters...

Part Number: 101-0015More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to...

Part Number: 101-0106Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion conne...

Part Number: 101-0199Stainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP t...

Part Number: 101-0320Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitab...

Part Number: 101-0044This three channel igniter is suitable for electronic ignition applications.  Required when using coils that don't have inbuil...

Part Number: 101-00052.5 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom h...

Part Number: 101-0076Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread

Part Number: 101-0164This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged application...

Part Number: 101-0034Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of eth...

Part Number: 101-0046Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (N...

Part Number: 101-0163 The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged a...

Part Number: 101-0165The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applic...

Part Number: 101-0197Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector.  Plugs directly into the CAN socket o...

Part Number: 101-0198Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN conn...

Part Number: 101-0054Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knockl...

Part Number: 101-0077Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread

Part Number: 135-1000Link's highly anticipated PDM, the Razor PDM, is an intelligent Power Distribution Module that replaces traditional fuses and ...

Part Number: 101-00062.5 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom h...

Part Number: 101-0212CAN Splitter Cable for connecting an additional CAN devices. Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices....

Part Number: 101-0211Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6Pin round CAN connector on the front of t...

Part Number: 101-0016Thinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost contr...

Part Number: 101-0103Small Diameter Trigger wheel – Medium and Large sizes also available. 24 tooth 150mm diameter 40mm centre

Part Number: 101-0080Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and Wiring Up to 150 PSI above at...

Part Number: 101-0280Hall effect sensor designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provi...

Part Number: 101-0162 The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated...

Part Number: 110-0005

Part Number: 100-0113

Part Number: 101-00030.4m long 'B' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’...

Part Number: 101-00020.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’...

Part Number: 101-00095 m long 'B' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has...

Part Number: 115-1000Link's external E-throttle (Drive by Wire) module works with Link's G4X ECUs (except the entry level AtomX), plus G4+ ECUs (St...

Part Number: 101-0225Deutsch DTM4 Connector Kit (Female) to suit Link CAN Bus connections. Use to connect CAN devices into Link CAN bus. Includes F...