Aeroflow Nitrous Bottle Heater Blanket Only Suit 10 & 15 lbs Bottles (AF49-1077)
Suit 10 & 15 lbs BottlesNITROUS REPLACEMENT HEATER
Suit 10 & 15 lbs Bottles
Part Number: AF49-1077
To get peak performance from your nitrous oxide system it's a well-known fact that the nitrous bottle pressure plays the most important role to having a constant tune. If your bottle pressure is too low, it will be too rich and too much bottle pressure, you may be getting into a lean tune up. This can cause the solenoids to not activate or worst case you run into the safety issues with the bottle.
The Aeroflow Performance replacement heater blanket is the perfect companion to your nitrous bottle. It can be used with our automatic pressure-controlled switch (sold separately) or can be hard wired into your aftermarket ECU. This blanket is sold as a replacement part and we recommend it to be used with our kit to control the heater element itself. It must be used with a switch to ensure the heater bottle is not left on and exposing the nitrous bottle to extreme temperatures.
Important Information:
- This heater may be hot during and post operation. The surface heats quickly and cools down slowly. Burns may result from touching the heater surface.
- Keep away from water and external fluids.
- Do not clean with any solvents.
- It must be used with a switch to ensure the heater bottle is not left on and exposing the nitrous bottle to extreme temperatures.
- To protect against personal injury or equipment damage all nitrous bottle warmers must be used with a functioning pressure relief valve in conjunction with a pressure gauge and automatic heater shut off valve.