0800 FASTLANE
0800 FASTLANE
Link Engine Management is a global leader in motorsport electronics and performance technology. They specialise in the development, manufacture and marketing of engine control units (ECUs) built to manage motorsport and powersport vehicles. Link ECU offers the popular G4+ and G4X ranges that include Standalone ECUs as well as Plug and Play ECUs. Link is headquartered in Christchurch, New Zealand with further sales offices located around the world.
Part Number: 101-0049Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount v...
View full detailsPart Number: 101-0047Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-...
View full detailsPart Number: 101-0186High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mat...
View full detailsPart Number: 101-0025Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with al...
View full detailsPart Number: 101-0146Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Inclu...
View full detailsPart Number: 101-0100Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are ...
View full detailsPart Number: 101-0298The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged...
View full detailsPart Number: 101-0165The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applic...
View full detailsPart Number: 101-0295The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged...
View full detailsPart Number: 101-00085 m long 'A' loom to suit G4, G4+ and G4X ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has...
View full detailsPart Number: 101-00020.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’...
View full detailsPart Number: 101-0033Dual core screen cable for use with trigger signals and knock sensors - 10m per pack
Part Number: 101-0195
Part Number: 101-00105 m, to suit obsolete G4 Atom and Lightning only. Does NOT fit G4+ Atom
Part Number: 101-00524 x EV14 1000cc fuel injectors in their unmodified form as they come from Bosch. Injectors are tested and graded into flow mat...
View full detailsPart Number: 101-0289USCar Fuel Injector Connector Kit Includes: Housing Crimp terminals Terminal seals Seal locating tab Locking tab
Part Number: 101-0288Injector Adapter - USCar (Male) to Bosch Junior Timer/Jetronic (Female) Fits Bosch Junior Timer/EV1/Jetronic injector and conn...
View full detailsPart Number: 101-0287Bosch Junior Timer / Jetronic (Male) to USCar (Female) Adapter Commonly used when upgrading to fuel injectors with the newer U...
View full detailsPart Number: 101-0013For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you ...
View full detailsPart Number: 101-0014For use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you ...
View full detailsPart Number: 101-0012For use with Low-Impedence Injectors. Includes set of 2 x 1 Ohm 50w resistors mounted to a heatsink. These are also sold in a ...
View full detailsPart Number: 101-0011For use with Low-Impedence Injectors. Includes a single 1 Ohm 50W resistor mounted to a heatsink. Please contact us to ensure ...
View full detailsPart Number: 101-019154mm Electronic Throttle Body 54mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on in...
View full detailsPart Number: 101-019082mm Electronic Throttle Body 82mm Bore size Dual potentiometer redundancy Bosch quality and performance Includes groove on in...
View full detailsPart Number: 101-0188E-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiomete...
View full detailsPart Number: 400-0100Requires modification to be done by Global HQ at time of order (allow approx 2 weeks in addition to standard lead time). E-Thr...
View full detailsPart Number: 101-0300Terminated Engine Harness to cover a wide range of GM LS Engine Variations. Please note that due to the large number of Engine...
View full detailsPart Number: 101-0301• Intended for use with our terminated LS engine harness. Plug and play compatibility with GM LS IAC stepper motors. If you...
View full detailsPart Number: 101-0302• Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 3 LS map sensors
Part Number: 101-0304• Intended for use with our terminated LS engine harness. Plug and play compatibility for Gen 4 LS DBW throttle bodies. • ...
View full detailsPart Number: 101-0305• Intended for use with our terminated LS engine harness. Plug and play compatibility with factory Gen 3 Knock Sensor loom ...
View full detailsPart Number: 101-0306 Intended for use with our terminated LS engine harness. Plug and play compatibility with Gen 4 Knock Sensors in factory locat...
View full detailsPart Number: 100-0172Link MXG Strada 7” dash, powered by AIM. The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for ro...
View full detailsPart Number: 100-0173Link MXG Strada 7” dash, powered by AIM. The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB sh...
View full detailsPart Number: 101-0227Use to link two or more CAN Gauges together.
Part Number: 100-0169Link MXS Strada 5" Dash, powered by AIM. The Link MXS Strada Race Edition is a full colour, 5-inch dash display with 10 RGB sh...
View full details