{"title":"Insulation","description":"","products":[{"product_id":"aeroflow-t25-t28-black-turbo-bag-blanket","title":"Aeroflow T25 \/ T28 Black Turbo Bag \/ Blanket (AF91-1006)","description":"\u003cp\u003eTURBO BAG BLACK GT25 GT28\u003c\/p\u003e\u003cp\u003eSuit GT25 and GT28 FrameTurbochargers with Internal Wastegate\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-1006\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 600°C (1112°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295047745763,"sku":"AF91-1006","price":221.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-1006.jpg?v=1688013221"},{"product_id":"aeroflow-t6-black-turbo-bag-blanket","title":"Aeroflow T6 Black Turbo Bag \/ Blanket (AF91-1005)","description":"\u003cp\u003eTURBO BAG BLACK GT45 GT47\u003c\/p\u003e\u003cp\u003eSuit GT45 and GT47 FrameTurbochargers with T6 or T4 Flange\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-1005\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 600°C (1112°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295053447395,"sku":"AF91-1005","price":221.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-1005.jpg?v=1688013240"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-1909)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 5\/16\" ID\u003c\/p\u003e\u003cp\u003e5\/16\" (7.93mm) I.D., Suits -3 \u0026amp; -4 PTFE Hoses, 1m length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-1909\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cul\u003e\n\u003cli\u003eInsulates hoses and cables in high heat areas. Withstands up to 500°F\/260°C.\u003c\/li\u003e\n\u003cli\u003e Length 1m \/ 3ft\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Not recommended for direct contact with heat source.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295055544547,"sku":"AF91-1909","price":36.4,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-1909.jpg?v=1688013257"},{"product_id":"aeroflow-exhaust-insulation-wrap","title":"Aeroflow Exhaust Insulation Wrap (AF91-3011)","description":"\u003cp\u003eEXHAUST INSULATION WRAP2\"X15FT\u003c\/p\u003e\u003cp\u003e2\" Wide, 15ft Length, Titanium\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-3011\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's Titanium exhaust wrap is the cutting edge technology of exhaust wraps, titanium wrap is engineered to be stronger and more durable without the need to pre-wet the roll before installation and features a carbon fibre like look that withstands 1800°F \/ 980°C and 2500°F \/ 1371°C of intermittent radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295059378403,"sku":"AF91-3011","price":54.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-3011.jpg?v=1688013260"},{"product_id":"aeroflow-exhaust-insulation-wrap-1","title":"Aeroflow Exhaust Insulation Wrap (AF91-3010)","description":"\u003cp\u003eEXHAUST INSULATION WRAP1\"X15FT\u003c\/p\u003e\u003cp\u003e1\" Wide, 15ft Length, Titanium\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-3010\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's Titanium exhaust wrap is the cutting edge technology of exhaust wraps, titanium wrap is engineered to be stronger and more durable without the need to pre-wet the roll before installation and features a carbon fibre like look that withstands 1800°F \/ 980°C and 2500°F \/ 1371°C of intermittent radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295059509475,"sku":"AF91-3010","price":36.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-3010.jpg?v=1688013260"},{"product_id":"aeroflow-aluminised-heat-sleeve","title":"Aeroflow Aluminised Heat Sleeve (AF91-5001)","description":"\u003cp\u003eALUMINISED HEAT SLEEVE 5\/8\"-1\"\u003c\/p\u003e\u003cp\u003eWithstands 500°F Direct Heat\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-5001\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's heat sleeve is designed to simply slide over hoses ,cables and wires to provide the ultimate protection from radiant heat. It is constructed from a fiberglass inner weave and protected by an aluminised heat barrier that also protects from fluid and oil spills and is capable of withstanding 500°F \/ 260°C direct heat and 2000°F \/ 1100°C radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295065473251,"sku":"AF91-5001","price":44.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-5001.jpg?v=1688013301"},{"product_id":"aeroflow-braided-sleeve-heat-shield","title":"Aeroflow Braided Sleeve Heat Shield (AF91-9002)","description":"\u003cp\u003e1\" 1 METER HEAT BRAID SLEEVE\u003c\/p\u003e\u003cp\u003e1\" (25.4mm) I.D Suit Hose -6, -8, -10, -12, 1m (3ft)\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-9002\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s braided sleeve is lightweight and extremely flexible. It is braided from fiberglass yarns and coated with high temperature resins. It can be used for insulating wire bundles or cables as well protecting against damage caused by abrasion from sharp edges, high impacts and vibration. With a tough woven construction, this braided heat sleeve withstands up to 500°C (932°F) and splashes of 1100°C (2000°F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a braided sleeve diameter that is a smaller size than required foryour application. For a more flexible\/loose fit select a braided sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003eIf the braided sleeve is not cut correctly it can fray.To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron witha sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the braid. While the end is cooling you can flare it usinga small cone-shaped object to hold it open. Once the braid sleeve is cut to size simply push and slide the sleeve intoplace over the cable and finish it off with either heatshrink or Aeroflow hose end finishers for that professional look.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295129796835,"sku":"AF91-9002","price":31.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-9002.jpg?v=1688013590"},{"product_id":"aeroflow-braided-sleeve-heat-shield-1","title":"Aeroflow Braided Sleeve Heat Shield (AF91-9001)","description":"\u003cp\u003e1\/2\" 1 METER HEAT BRAID SLEEVE\u003c\/p\u003e\u003cp\u003e1\/2\" (12.7mm) I.D Suit Hose -5,(-6 PTFE), 1m (3\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-9001\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s braided sleeve is lightweight and extremely flexible. It is braided from fiberglass yarns and coated with high temperature resins. It can be used for insulating wire bundles or cables as well protecting against damage caused by abrasion from sharp edges, high impacts and vibration. With a tough woven construction, this braided heat sleeve withstands up to 500°C (932°F) and splashes of 1100°C (2000°F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a braided sleeve diameter that is a smaller size than required foryour application. For a more flexible\/loose fit select a braided sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003eIf the braided sleeve is not cut correctly it can fray.To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron witha sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the braid. While the end is cooling you can flare it usinga small cone-shaped object to hold it open. Once the braid sleeve is cut to size simply push and slide the sleeve intoplace over the cable and finish it off with either heatshrink or Aeroflow hose end finishers for that professional look.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295129829603,"sku":"AF91-9001","price":16.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-9001.jpg?v=1688013590"},{"product_id":"aeroflow-flex-braid-wrap-1-4-6-35mm-i-d-1-meter-length","title":"Aeroflow Flex Braid Wrap 1\/4\" (6.35mm) I.D. 1 Meter Length (AF91-7050)","description":"\u003cp\u003e1\/4\" 1 METER HEAT FLEX BRAID\u003c\/p\u003e\u003cp\u003eBlack Finish, Tight Weave High Coverage\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-7050\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s heat-flex braid is lightweight and extremely flexible. Made of PET (Polyethylene Terephthalate) this heat-flex braid can be used for insulating wire bundles or cables while offering that factory look. Heat-flex braid can also be used on heater andradiator hoses. With a tough woven construction, heat-flex provides a continuous temperature rating of up to 127°C (260°F) and a melting temperature of 250°C (482°F).\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a braid wrap diameter that is a smaller size than required for your application. For a more flexible\/loose fit select a braid wrap diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003eIf the braided wrap is not cut correctly it can fray. To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron witha sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the braid. While the end is cooling you can flare it usinga small cone-shaped object to hold it open. Once the braid wrap is cut to size simply push and slide the sleeve intoplace over the cable and finish it off with either heatshrink or Aeroflow hose end finishers for that professional look.\u003c\/p\u003e \u003cp\u003eAvailable in a black finishin sizes from 3mm (1\/8”)up to 38.1mm (1-1\/2”) size I.D. with two length options to choose from 1m (3ft) and 7.6m (25ft).\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295131500771,"sku":"AF91-7050","price":9.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-7050.jpg?v=1688013592"},{"product_id":"aeroflow-exhaust-insulation-wrap-2","title":"Aeroflow Exhaust Insulation Wrap (AF91-3013)","description":"\u003cp\u003eEXHAUST INSULATION WRAP2\"X50FT\u003c\/p\u003e\u003cp\u003e2\" Wide, 50ft Length, Black Titanium\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-3013\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's Black Titanium exhaust wrap is an innovative way to reduce unwanted and power-robbing engine compartment heat. By wrapping your exhaust headers and down pipes you decrease exhaust density and increase exhaust flow resulting in more power! The Black Titanium exhaust wrap is rated to withstand 980°C (1800°F) and 1371°C (2500°F) of intermittent radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295161155811,"sku":"AF91-3013","price":128.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-3013.jpg?v=1688013707"},{"product_id":"aeroflow-subaru-titanium-turbo-bag-blanket","title":"Aeroflow Subaru Titanium Turbo Bag \/ Blanket (AF91-8001)","description":"\u003cp\u003eTURBO BAG TITANIUM WRX \/ STI\u003c\/p\u003e\u003cp\u003eSuit EJ20 and EJ25 Engine with Stock VF Internal Gate Turbocharger\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8001\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eSpecifically designed to suit Subaru turbo engines using the factory VF turbocharger with an internal wastegate actuator.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295177801955,"sku":"AF91-8001","price":247.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8001.jpg?v=1688013754"},{"product_id":"aeroflow-aluminium-embossed-heat-shield","title":"Aeroflow Aluminium Embossed Heat Shield (AF91-4582)","description":"\u003cp\u003e24\" X 24\" ALUMINIUM EMBOSSED\u003c\/p\u003e\u003cp\u003e24\" x 24\" (609.60mm x 609.60mm)\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4582\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance single layered aluminium embossed heat shielding is most effective way to control and manage radiant heat in any application. it can cut the effects of radiant heat by up to 90% to protect vital components in your vehicle from heat soak. This shielding is easy to cut with tin snips or scissors and can be drilled or screwed together to create a variety of different shapes. Simply fold and form edges with a hammer on a square edge.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295182225635,"sku":"AF91-4582","price":118.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4582.jpg?v=1688013770"},{"product_id":"aeroflow-t4-titanium-turbo-bag-blanket","title":"Aeroflow T4 Titanium Turbo Bag \/ Blanket (AF91-8004)","description":"\u003cp\u003eTURBO BAG TITANIUM T04 GT42\u003c\/p\u003e\u003cp\u003eSuit GT42 Frame Turbochargers with T4 Flange\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8004\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295212568803,"sku":"AF91-8004","price":247.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8004.jpg?v=1688013935"},{"product_id":"aeroflow-t3-carbon-turbo-bag-blanket","title":"Aeroflow T3 Carbon Turbo Bag \/ Blanket (AF91-8802)","description":"\u003cp\u003eTURBO BAG CARBON  GT35\u003c\/p\u003e\u003cp\u003eSuit GT35 and GT40 FrameTurbochargers with T3 Flange\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8802\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 1000°C(1832°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295215354083,"sku":"AF91-8802","price":266.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8802.jpg?v=1688013945"},{"product_id":"aeroflow-starter-motor-heat-shield","title":"Aeroflow Starter Motor Heat Shield (AF91-6010)","description":"\u003cp\u003eALUMINISED STARTER HEAT SHIELD\u003c\/p\u003e\u003cp\u003eFlexible aluminised surface reflects up to 1100°C radiant heat\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-6010\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s Aluminised Starter Heat Shield is the latest in heat prevention to your starter motor. Due to starter problems that can be caused by the close proximity of an exhaust to the starter, these shields are perfect for enabling the user to insulate the starter and solenoid. Withstanding 1100°C (2000F) radiant heat \u0026amp; 260°C (500F) of direct heat, this heat shield with protect your starter from heat and increase the longevity of your starter motor. Supplied with 2 straps.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295221154019,"sku":"AF91-6010","price":33.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-6010.jpg?v=1688013975"},{"product_id":"aeroflow-carbon-wastegate-bag","title":"Aeroflow Carbon Wastegate Bag (AF91-8844)","description":"\u003cp\u003e44mm WASTEGATE BAG CARBON\u003c\/p\u003e\u003cp\u003eSuit 44mm Wastegate\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8844\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance external wastegate bag \/ blanket range provides high quality material selection, design, and construction, whilst at an affordable price.These wastegate bags are designed to help minimize the heat soak transfer between themain body and actuator body ofthe wastegate. This will allowa more stable operation of thewastegate valve allowing consistent performance of the turbocharger. The added benefit from these bags will prevent the heat from damagingcomponents surrounding the external wastegates such as wiring and hoses. Will suit Aeroflow External Wastegates. May also suit other brands. Available in two different options titanium and carbon.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295226921187,"sku":"AF91-8844","price":50.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8844.jpg?v=1688014015"},{"product_id":"aeroflow-flex-braid-wrap-1-1-2-38-10mm-i-d-1-meter-length","title":"Aeroflow Flex Braid Wrap 1-1\/2\" (38.10mm) I.D. 1 Meter Length (AF91-7053)","description":"\u003cp\u003e1-1\/2\" 1 METER HEAT FLEX BRAID\u003c\/p\u003e\u003cp\u003eBlack Finish, Tight Weave High Coverage\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-7053\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s heat-flex braid is lightweight and extremely flexible. Made of PET (Polyethylene Terephthalate) this heat-flex braid can be used for insulating wire bundles or cables while offering that factory look. Heat-flex braid can also be used on heater andradiator hoses. With a tough woven construction, heat-flex provides a continuous temperature rating of up to 127°C (260°F) and a melting temperature of 250°C (482°F).\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a braid wrap diameter that is a smaller size than required for your application. For a more flexible\/loose fit select a braid wrap diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003eIf the braided wrap is not cut correctly it can fray. To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron witha sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the braid. While the end is cooling you can flare it usinga small cone-shaped object to hold it open. Once the braid wrap is cut to size simply push and slide the sleeve intoplace over the cable and finish it off with either heatshrink or Aeroflow hose end finishers for that professional look.\u003c\/p\u003e \u003cp\u003eAvailable in a black finishin sizes from 3mm (1\/8”)up to 38.1mm (1-1\/2”) size I.D. with two length options to choose from 1m (3ft) and 7.6m (25ft).\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295287410915,"sku":"AF91-7053","price":14.4,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-7053.jpg?v=1688014343"},{"product_id":"aeroflow-ford-xr6-carbon-turbo-bag-blanket","title":"Aeroflow Ford XR6 Carbon Turbo Bag \/ Blanket (AF91-8800)","description":"\u003cp\u003eTURBO BAG CARBON FORD\u003c\/p\u003e\u003cp\u003eSuit Barra Engine with Stock GT35 Internal Gate Turbocharger\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8800\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eSpecifically designed to suit Ford XR6 BA\/BF\/FG with the turbo Barra engine using the factory turbocharger. Willalso suit most GT30\/GT35 frameturbochargers using a internalwastegate actuator.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 1000°C(1832°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295287804131,"sku":"AF91-8800","price":266.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8800.jpg?v=1688014344"},{"product_id":"aeroflow-carbon-wastegate-bag-1","title":"Aeroflow Carbon Wastegate Bag (AF91-8860)","description":"\u003cp\u003e60mm WASTEGATE BAG CARBON\u003c\/p\u003e\u003cp\u003eSuit 60mm Wastegate\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8860\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance external wastegate bag \/ blanket range provides high quality material selection, design, and construction, whilst at an affordable price.These wastegate bags are designed to help minimize the heat soak transfer between themain body and actuator body ofthe wastegate. This will allowa more stable operation of thewastegate valve allowing consistent performance of the turbocharger. The added benefit from these bags will prevent the heat from damagingcomponents surrounding the external wastegates such as wiring and hoses. Will suit Aeroflow External Wastegates. May also suit other brands. Available in two different options titanium and carbon.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295295504611,"sku":"AF91-8860","price":59.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8860.jpg?v=1688014381"},{"product_id":"aeroflow-t4-black-turbo-bag-blanket","title":"Aeroflow T4 Black Turbo Bag \/ Blanket (AF91-1004)","description":"\u003cp\u003eTURBO BAG BLACK T04 GT42\u003c\/p\u003e\u003cp\u003eSuit GT42 Frame Turbochargers with T4 Flange\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-1004\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 600°C (1112°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295308710115,"sku":"AF91-1004","price":221.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-1004.jpg?v=1688014466"},{"product_id":"aeroflow-subaru-black-turbo-bag-blanket","title":"Aeroflow Subaru Black Turbo Bag \/ Blanket (AF91-1001)","description":"\u003cp\u003eTURBO BAG BLACK WRX \/ STI\u003c\/p\u003e\u003cp\u003eSuit EJ20 and EJ25 Engine with Stock VF Internal Gate Turbocharger\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-1001\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eSpecifically designed to suit Subaru turbo engines using the factory VF turbocharger with an internal wastegate actuator.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 600°C (1100°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295309267171,"sku":"AF91-1001","price":221.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-1001.jpg?v=1688014474"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves-1","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-2001)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 1\" ID\u003c\/p\u003e\u003cp\u003e1\"(25.4mm) I.D., Suits -6, -8, -10 \u0026amp; -12 PTFE Hoses, 3.7mlength, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-2001\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow Heat Guard heat shield is engineered to protect hoses, cables and wireharnesses from damage due to exposure to extreme heat, openflame, molten splash and welding sparks. It resists allautomotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection.\u003c\/p\u003e \u003cp\u003eMade with a thick, high temperature resist fiberglass sleeve that is jacketed with anon-permeable, heavy duty black silicone coating. This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant high temperatures is mandatory. These heat sleeves are flame resistant, and can be exposed to constant heat of up to 260C(500F) with splashes of moltenmaterials with temperatures ofup to 1100C (2000F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a heat sleevediameter that is a smaller size than required for your application. For a more flexible\/loose fit select a heat sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295439651043,"sku":"AF91-2001","price":204.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-2001.jpg?v=1688014723"},{"product_id":"aeroflow-gold-heat-barrier-12-x-24-sheet","title":"Aeroflow Gold Heat Barrier 12\" x 24\" Sheet (AF91-4011)","description":"\u003cp\u003eGOLD HEAT BARRIER 12\" x 24\"\u003c\/p\u003e\u003cp\u003eAdhesive backed Aluminised surface reflects up to 2000°F radiant heat.\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4011\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's adhesive backed barrier has the same high quality features as the flexible heat barrier with the added adhesive back allowing neat and easy installation. Flexible adhesive backed barrier can only be applied one way adhesive side down. Withstands 2000°F \/ 1100°C radiant heat and 1200°F \/ 650°C direct heat, can be trimmed to fit then simply peel and stick. \u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295447285987,"sku":"AF91-4011","price":46.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4011.jpg?v=1688014741"},{"product_id":"aeroflow-exhaust-insulation-wrap-3","title":"Aeroflow Exhaust Insulation Wrap (AF91-3015)","description":"\u003cp\u003eEXHAUST INSULATION WRAP2\"X15FT\u003c\/p\u003e\u003cp\u003e2\" Wide, 15ft Length, Black Titanium\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-3015\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's Black Titanium exhaust wrap is an innovative way to reduce unwanted and power-robbing engine compartment heat. By wrapping your exhaust headers and down pipes you decrease exhaust density and increase exhaust flow resulting in more power! The Black Titanium exhaust wrap is rated to withstand 980°C (1800°F) and 1371°C (2500°F) of intermittent radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295483101411,"sku":"AF91-3015","price":54.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-3015.jpg?v=1688014954"},{"product_id":"aeroflow-fuel-jug-cover-fuel-jug-cover-uv-shieldsuit-uv-shield","title":"Aeroflow Fuel Jug Cover \u0026 (AF91-8050)","description":"\u003cp\u003efuel jug cover \u0026amp; UV shield\u003c\/p\u003e\u003cp\u003eSuit Square Jugs Round Jugs\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8050\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eMany pit areas and paddocksrequire fuel to be stored outside which exposes your fuel jug to the summer sun. This heat exposure shortens the life of the fuel and degrades the performance potential. Keep fuel temperatures stable and extendthe pot life of expensive racefuels with Aeroflow fuel jug covers.\u003c\/p\u003e \u003cp\u003eThis high-tech jacket fits over most brands of round 18.9litre jugs, including Jaz, VP,and others. The woven insulating material shields the fuel from radiant heat, while the reflective aluminized outer layer blocks both visible and invisible light. Your fuel stays up to 20 degrees cooler, which meansless thermal breakdown. It also means less tendency for your fuel jugs to \"inflate\" asthe day goes on. Open-top design lets you leave your filler hose attached to the cap. Sold individually.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295484969187,"sku":"AF91-8050","price":87.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8050.jpg?v=1688014961"},{"product_id":"aeroflow-aluminised-heat-sleeve-1","title":"Aeroflow Aluminised Heat Sleeve (AF91-5011)","description":"\u003cp\u003eALUMINISED HEAT SLEEVE 5\/8\"-1\"\u003c\/p\u003e\u003cp\u003eWithstands 500°F Direct Heat\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-5011\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's heat sleeve is designed to simply slide over hoses ,cables and wires to provide the ultimate protection from radiant heat. It is constructed from a fiberglass inner weave and protected by an aluminised heat barrier that also protects from fluid and oil spills and is capable of withstanding 500°F \/ 260°C direct heat and 2000°F \/ 1100°C radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295485296867,"sku":"AF91-5011","price":191.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-5011.jpg?v=1688014961"},{"product_id":"aeroflow-flex-braid-wrap-1-4-6-35mm-i-d-7-6-meter-length","title":"Aeroflow Flex Braid Wrap 1\/4\" (6.35mm) I.D. 7.6 Meter Length (AF91-7550)","description":"\u003cp\u003e1\/4\" 7.6 METER HEAT FLEX BRAID\u003c\/p\u003e\u003cp\u003eBlack Finish, Tight Weave High Coverage\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-7550\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s heat-flex braid is lightweight and extremely flexible. Made of PET (Polyethylene Terephthalate) this heat-flex braid can be used for insulating wire bundles or cables while offering that factory look. Heat-flex braid can also be used on heater andradiator hoses. With a tough woven construction, heat-flex provides a continuous temperature rating of up to 127°C (260°F) and a melting temperature of 250°C (482°F).\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a braid wrap diameter that is a smaller size than required for your application. For a more flexible\/loose fit select a braid wrap diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003eIf the braided wrap is not cut correctly it can fray. To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron witha sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the braid. While the end is cooling you can flare it usinga small cone-shaped object to hold it open. Once the braid wrap is cut to size simply push and slide the sleeve intoplace over the cable and finish it off with either heatshrink or Aeroflow hose end finishers for that professional look.\u003c\/p\u003e \u003cp\u003eAvailable in a black finishin sizes from 3mm (1\/8”)up to 38.1mm (1-1\/2”) size I.D. with two length options to choose from 1m (3ft) and 7.6m (25ft).\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295486738659,"sku":"AF91-7550","price":65.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-7550.jpg?v=1688014966"},{"product_id":"aeroflow-wire-hose-overwrap","title":"Aeroflow Wire \u0026 Hose Overwrap (AF91-9902)","description":"\u003cp\u003e1\" 1 METER HEAT WRAP WIRE\u003c\/p\u003e\u003cp\u003e1\" (25.4mm) I.D Suit Hose -6, -8, -10, -12, 1m (3\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-9902\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow flexible split wire and hose overwrap is the perfect solution to protect wires, cables, wire harnesses where ease of installation is paramount. It offers innovative solutions for the protection of breakout areas on wiring harnesses and provides easy removal which isnecessary for inspection or maintenance of wires. Its inherent flexibility allows itto bend, coil and conform to irregular shapes. While its open and self-closing design allows it to be installed after components have been fitted. This wire and hose overwrap withstands up to 410F\/ 210C and splashes of 660F \/ 350C. \u003cstrong\u003eNot recommended for direct contact with heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose an overwrap with a diameter that is a smaller size than required foryour application. For a more flexible\/loose fit select an overwrap with a diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003eIf the hose overwrap is notcut correctly it can fray. To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron witha sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the wire overwrap. While the end is cooling you can flare it using a small cone-shaped object to hold it open. Once the overwrap is cut to size simply open up the sleeve overthe cable and finish it off with either heat shrink or Aeroflow hose end finishers for that professional look.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295492473059,"sku":"AF91-9902","price":31.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-9902.jpg?v=1688014997"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves-2","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-2011)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 1\" ID\u003c\/p\u003e\u003cp\u003e1\" (25.4mm) I.D., Suits -6, -8, -10 \u0026amp; -12 PTFE Hoses, 1m length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-2011\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow Heat Guard heat shield is engineered to protect hoses, cables and wireharnesses from damage due to exposure to extreme heat, openflame, molten splash and welding sparks. It resists allautomotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection.\u003c\/p\u003e \u003cp\u003eMade with a thick, high temperature resist fiberglass sleeve that is jacketed with anon-permeable, heavy duty black silicone coating. This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant high temperatures is mandatory. These heat sleeves are flame resistant, and can be exposed to constant heat of up to 260C(500F) with splashes of moltenmaterials with temperatures ofup to 1100C (2000F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a heat sleevediameter that is a smaller size than required for your application. For a more flexible\/loose fit select a heat sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295497650403,"sku":"AF91-2011","price":73.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-2011.jpg?v=1688015018"},{"product_id":"aeroflow-heat-barrier-40-x-36-sheet","title":"Aeroflow Heat Barrier - 40\" x 36\" Sheet (AF91-6002)","description":"\u003cp\u003e40\" X 36\" ALUMINISED HEAT\u003c\/p\u003e\u003cp\u003eFlexible Aluminised surface reflects up to 2000°F radiant heat\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-6002\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s heat barrier is an excellent method for reflecting unwanted heat from surfaces needing protection. Minimal thickness to provide an easy installation and can be retained in place with Aeroflow’s stainless straps or simply riveted in place. When used as a heat shield the barrier should be installed so the bright metallic surface faces the heat source. When used to retain heat, the fabric side faces the heat source. This allows the metallic surface to act as a barrier to prevent penetration of fluids. Withstands 1100°C (2000F) radiant heat and 650°C (1200F) direct heat and can be easily trimmed to desired size.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295553388771,"sku":"AF91-6002","price":177.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-6002.jpg?v=1688015347"},{"product_id":"aeroflow-nissan-r35-gtr-titanium-turbo-bag-blanket","title":"Aeroflow Nissan R35 GTR Titanium Turbo Bag \/ Blanket (AF91-8010)","description":"\u003cp\u003eTURBO BAGS TITANIUM R35 GTR\u003c\/p\u003e\u003cp\u003eSuit VR38 Engine, Sold as a Pair\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8010\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eSpecifically designed to suit Nissan R35 GTR with a VR38DETT engine using the factory turbocharger. Sold as a pair for both turbochargers.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295553454307,"sku":"AF91-8010","price":366.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8010.jpg?v=1688015350"},{"product_id":"aeroflow-barricade-peel-roll-noise-and-heat-supressor","title":"Aeroflow BARRICADE Peel \u0026 Roll Noise and Heat Supressor (AF91-4502)","description":"\u003cp\u003e24\" x 90\" noise \/ heat\u003c\/p\u003e\u003cp\u003e24\" (609mm) x 90\" (2286mm) Roll\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4502\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThis peel and stick adhesive backed heat \/ noise suppressor is constructed from the highest quality material. The pressure sensitive adhesive make it a breeze to install especially in hard to reach places. The versatility allows it to be used in interior and exterior applications to block out heat around fuel tanks and exhaust systems and provide acoustical sound deadening inside the cabin. Available in 24\" (609.6mm) in a 30\" (762mm), 60\" (1524mm) and 90\" (2286mm) lengths. Thickness is 2.7mm.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295564726499,"sku":"AF91-4502","price":163.1,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4502.jpg?v=1688015371"},{"product_id":"aeroflow-exhaust-insulation-wrap-4","title":"Aeroflow Exhaust Insulation Wrap (AF91-3009)","description":"\u003cp\u003eEXHAUST INSULATION WRAP2\"X50FT\u003c\/p\u003e\u003cp\u003e2\" Wide, 50ft Length, Titanium\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-3009\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's Titanium exhaust wrap is the cutting edge technology of exhaust wraps, titanium wrap is engineered to be stronger and more durable without the need to pre-wet the roll before installation and features a carbon fibre like look that withstands 1800°F \/ 980°C and 2500°F \/ 1371°C of intermittent radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295574393059,"sku":"AF91-3009","price":128.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-3009.jpg?v=1688015421"},{"product_id":"aeroflow-aluminium-embossed-heat-shield-1","title":"Aeroflow Aluminium Embossed Heat Shield (AF91-4580)","description":"\u003cp\u003e12\" X 12\" ALUMINIUM EMBOSSED\u003c\/p\u003e\u003cp\u003e12\" x 12\" (304.80mm x 304.80mm)\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4580\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance single layered aluminium embossed heat shielding is most effective way to control and manage radiant heat in any application. it can cut the effects of radiant heat by up to 90% to protect vital components in your vehicle from heat soak. This shielding is easy to cut with tin snips or scissors and can be drilled or screwed together to create a variety of different shapes. Simply fold and form edges with a hammer on a square edge.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295575834851,"sku":"AF91-4580","price":41.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4580.jpg?v=1688015432"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves-3","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-2000)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 1\/2\" ID\u003c\/p\u003e\u003cp\u003e1\/2\" (12.7mm) I.D., Suits-3, -4, -5 \u0026amp; -6 PTFE Hoses, 3.7m length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-2000\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow Heat Guard heat shield is engineered to protect hoses, cables and wireharnesses from damage due to exposure to extreme heat, openflame, molten splash and welding sparks. It resists allautomotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection.\u003c\/p\u003e \u003cp\u003eMade with a thick, high temperature resist fiberglass sleeve that is jacketed with anon-permeable, heavy duty black silicone coating. This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant high temperatures is mandatory. These heat sleeves are flame resistant, and can be exposed to constant heat of up to 260C(500F) with splashes of moltenmaterials with temperatures ofup to 1100C (2000F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a heat sleevediameter that is a smaller size than required for your application. For a more flexible\/loose fit select a heat sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295587205347,"sku":"AF91-2000","price":129.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-2000.jpg?v=1688015464"},{"product_id":"aeroflow-t3-black-turbo-bag-blanket","title":"Aeroflow T3 Black Turbo Bag \/ Blanket (AF91-1002)","description":"\u003cp\u003eTURBO BAG BLACK GT30 GT35\u003c\/p\u003e\u003cp\u003eSuit GT35 and GT40 FrameTurbochargers with T3 Flange\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-1002\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 600°C (1112°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295587696867,"sku":"AF91-1002","price":221.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-1002.jpg?v=1688015465"},{"product_id":"aeroflow-t3-titanium-turbo-bag-blanket","title":"Aeroflow T3 Titanium Turbo Bag \/ Blanket (AF91-8002)","description":"\u003cp\u003eTURBO BAG TITANIUM GT30 GT35\u003c\/p\u003e\u003cp\u003eSuit GT35 and GT40 FrameTurbochargers with T3 Flange\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8002\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance turbo bag \/ blanket range provides high quality materialselection, design, and construction, whilst at an affordable price. The turbo bag isolates the heat producedby your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine compartmentsuch as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve. Made from Hi-tempSilica material designed to reduce turbo lag and control under hood temperatures. Each turbo bag is sewn together with Kevlar stitching for a reinforced structure.\u003c\/p\u003e \u003cp\u003eUniversal replacement turbobag springs available AF59-2100\u003c\/p\u003e \u003cp\u003eThe internal rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003eThe external rating of these bags is up to 1370°C(2500°F).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Wheninstalling Turbo Bag over the turbocharger exhaust housing DO NOT over tighten, a loose fit is sufficient.\u003c\/p\u003e \u003cp\u003eOur Turbo Blankets and these fibres are 100% non-flammable; however, care should be taken to avoid contact with flammable liquidssuch as oil or fuels as these may be absorbed by our glass fibre fabrics and allow a flame to be produced. AeroflowPerformance are not responsible for any fire related damage caused by flammable liquid contamination.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295588778211,"sku":"AF91-8002","price":247.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8002.jpg?v=1688015472"},{"product_id":"aeroflow-exhaust-insulation-wrap-5","title":"Aeroflow Exhaust Insulation Wrap (AF91-3012)","description":"\u003cp\u003eEXHAUST INSULATION WRAP1\"X50FT\u003c\/p\u003e\u003cp\u003e1\" Wide, 50ft Length, Black Titanium\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-3012\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's Black Titanium exhaust wrap is an innovative way to reduce unwanted and power-robbing engine compartment heat. By wrapping your exhaust headers and down pipes you decrease exhaust density and increase exhaust flow resulting in more power! The Black Titanium exhaust wrap is rated to withstand 980°C (1800°F) and 1371°C (2500°F) of intermittent radiant heat.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295621906659,"sku":"AF91-3012","price":84.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-3012.jpg?v=1688015614"},{"product_id":"aeroflow-exhaust-insulation-wrap-6","title":"Aeroflow Exhaust Insulation Wrap (AF91-3007)","description":"\u003cp\u003eEXHAUST INSULATION WRAP2\"X15FT\u003c\/p\u003e\u003cp\u003e2\" Wide, 15ft Length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-3007\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's exhaust wrap is an innovative way to reduce unwanted and power robbing engine compartment heat, by wrapping your exhaust headers and down pipes you decrease exhaust density\u003cbr\u003eand increase exhaust flow resulting in more power! The White and Black exhaust wrap are rated to withstands 1200°F \/ 650°C direct heat and 2000°F \/ 1100°C of radiant heat. \u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295622725859,"sku":"AF91-3007","price":35.2,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/af91-3007.jpg?v=1688015622"},{"product_id":"aeroflow-aluminium-embossed-heat-shield-2","title":"Aeroflow Aluminium Embossed Heat Shield (AF91-4581)","description":"\u003cp\u003e12\" X 24\" ALUMINIUM EMBOSSED\u003c\/p\u003e\u003cp\u003e12\" x 24\" (304.80mm x 609.60mm)\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4581\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance single layered aluminium embossed heat shielding is most effective way to control and manage radiant heat in any application. it can cut the effects of radiant heat by up to 90% to protect vital components in your vehicle from heat soak. This shielding is easy to cut with tin snips or scissors and can be drilled or screwed together to create a variety of different shapes. Simply fold and form edges with a hammer on a square edge.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295636291811,"sku":"AF91-4581","price":68.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4581.jpg?v=1688015709"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves-4","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-1999)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 5\/16\" ID\u003c\/p\u003e\u003cp\u003e5\/16\" (7.93mm) I.D., Suits -3 \u0026amp; -4 PTFE Hoses, 3.7m length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-1999\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow Heat Guard heat shield is engineered to protect hoses, cables and wireharnesses from damage due to exposure to extreme heat, openflame, molten splash and welding sparks. It resists allautomotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection.\u003c\/p\u003e \u003cp\u003eMade with a thick, high temperature resist fiberglass sleeve that is jacketed with anon-permeable, heavy duty black silicone coating. This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant high temperatures is mandatory. These heat sleeves are flame resistant, and can be exposed to constant heat of up to 260C(500F) with splashes of moltenmaterials with temperatures ofup to 1100C (2000F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a heat sleevediameter that is a smaller size than required for your application. For a more flexible\/loose fit select a heat sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295636750563,"sku":"AF91-1999","price":79.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-1999.jpg?v=1688015708"},{"product_id":"aeroflow-spark-plug-boot-protector-150mm-length","title":"Aeroflow Spark Plug Boot Protector - 150mm Length (AF91-6050)","description":"\u003cp\u003eAEROFLOW 4pk SPARK PLUG BOOT\u003c\/p\u003e\u003cp\u003eBlack slip on design, withstands 500°F direct heat \u0026amp; 2000°F radiant heat, 4 pack\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-6050\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow’s spark plug boot and ignition wire insulators are the perfect solution for tight headers and turbo manifolds. These act as a dual-purpose spark insulator to reduce misfires, extend spark plug wire and boot life as well not reacting to petroleum products. Universal size fits most boot sizes and can easily be flexed for angled boot applications. Easy to install and most importantly non-flammable.\u003c\/p\u003e\n\u003cp\u003eAvailable in black finish which withstands 1100°C (2000°F) of radiant heat and 260°C (500°F) of direct heat. As well as an extreme duty titanium finish which withstands 1650°C (3000°F) of radiant heat and 1100°C (2000°F) of direct heat.\u003c\/p\u003e \u003cp\u003eSold as 4 packs.\u003c\/p\u003e \u003cp\u003eHeat Guard Spark Plug Boot Diameter is 1” (25mm).\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295643664611,"sku":"AF91-6050","price":78.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-6050.jpg?v=1688015732"},{"product_id":"aeroflow-heat-barrier-6-1-4-x-26-sheet","title":"Aeroflow Heat Barrier 6-1\/4\" x 26\" Sheet (AF91-4005)","description":"\u003cp\u003e6.25\"X26\" SHEET ALUMINISED HEA\u003c\/p\u003e\u003cp\u003eAdhesive backed aluminised surface reflects up to 2000°F radiant heat\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4005\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's adhesive backed barrier has the same high quality features as the flexible heat barrier with the added adhesive back allowing neat and easy installation. Flexible adhesive backed barrier can only be applied one way adhesive side down. Withstands 2000°F \/ 1100°C radiant heat and 1200°F \/ 650°C direct heat, can be trimmed to fit then simply peel and stick. \u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295658803427,"sku":"AF91-4005","price":108.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4005.jpg?v=1688015780"},{"product_id":"aeroflow-heat-barrier-24-x-36-sheet","title":"Aeroflow Heat Barrier - 24\" x 36\" Sheet (AF91-4003)","description":"\u003cp\u003e24\"X36\" SHEET ALUMINISED HEAT\u003c\/p\u003e\u003cp\u003eAdhesive backed aluminised surface reflects up to 2000°F radiant heat\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4003\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow's adhesive backed barrier has the same high quality features as the flexible heat barrier with the added adhesive back allowing neat and easy installation. Flexible adhesive backed barrier can only be applied one way adhesive side down. Withstands 2000°F \/ 1100°C radiant heat and 1200°F \/ 650°C direct heat, can be trimmed to fit then simply peel and stick. \u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295671779555,"sku":"AF91-4003","price":194.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4003.jpg?v=1688015818"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves-5","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-2010)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 1\/2\" ID\u003c\/p\u003e\u003cp\u003e1\/2\" (12.7mm) I.D., Suits -3, -4, -5 \u0026amp; -6 PTFEHoses, 1m length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-2010\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow Heat Guard heat shield is engineered to protect hoses, cables and wireharnesses from damage due to exposure to extreme heat, openflame, molten splash and welding sparks. It resists allautomotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection.\u003c\/p\u003e \u003cp\u003eMade with a thick, high temperature resist fiberglass sleeve that is jacketed with anon-permeable, heavy duty black silicone coating. This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant high temperatures is mandatory. These heat sleeves are flame resistant, and can be exposed to constant heat of up to 260C(500F) with splashes of moltenmaterials with temperatures ofup to 1100C (2000F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a heat sleevediameter that is a smaller size than required for your application. For a more flexible\/loose fit select a heat sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295701795043,"sku":"AF91-2010","price":53.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-2010.jpg?v=1688015911"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves-6","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-2003)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 3\/4\" ID\u003c\/p\u003e\u003cp\u003e3\/4\" (19mm) I.D., Suits -8,-10 \u0026amp; -12 PTFE Hoses, 3.7m length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-2003\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow Heat Guard heat shield is engineered to protect hoses, cables and wireharnesses from damage due to exposure to extreme heat, openflame, molten splash and welding sparks. It resists allautomotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection.\u003c\/p\u003e \u003cp\u003eMade with a thick, high temperature resist fiberglass sleeve that is jacketed with anon-permeable, heavy duty black silicone coating. This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant high temperatures is mandatory. These heat sleeves are flame resistant, and can be exposed to constant heat of up to 260C(500F) with splashes of moltenmaterials with temperatures ofup to 1100C (2000F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a heat sleevediameter that is a smaller size than required for your application. For a more flexible\/loose fit select a heat sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295713329379,"sku":"AF91-2003","price":180.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-2003.jpg?v=1688015973"},{"product_id":"aeroflow-barricade-peel-roll-noise-and-heat-supressor-1","title":"Aeroflow BARRICADE Peel \u0026 Roll Noise and Heat Supressor (AF91-4501)","description":"\u003cp\u003e24\" x 60\"  NOISE \/ HEAT\u003c\/p\u003e\u003cp\u003e24\" (609mm) x 60\" (1524mm) Roll\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-4501\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThis peel and stick adhesive backed heat \/ noise suppressor is constructed from the highest quality material. The pressure sensitive adhesive make it a breeze to install especially in hard to reach places. The versatility allows it to be used in interior and exterior applications to block out heat around fuel tanks and exhaust systems and provide acoustical sound deadening inside the cabin. Available in 24\" (609mm) in a 30\" (762mm), 60\" (1524mm) and 90\" (2286mm) lengths. Thickness is 2.7mm.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295724142819,"sku":"AF91-4501","price":110.4,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-4501.jpg?v=1688016015"},{"product_id":"aeroflow-wire-hose-overwrap-1","title":"Aeroflow Wire \u0026 Hose Overwrap (AF91-9901)","description":"\u003cp\u003e1\/2\" 1 METER HEAT WRAP WIRE\u003c\/p\u003e\u003cp\u003e1\/2\" (12.7mm) I.D Suit Hose -5,(-6 PTFE), 1m (3 Feet)\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-9901\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow flexible split wire and hose overwrap is the perfect solution to protect wires, cables, wire harnesses where ease of installation is paramount. It offers innovative solutions for the protection of breakout areas on wiring harnesses and provides easy removal which isnecessary for inspection or maintenance of wires. Its inherent flexibility allows itto bend, coil and conform to irregular shapes. While its open and self-closing design allows it to be installed after components have been fitted. This wire and hose overwrap withstands up to 410F\/ 210C and splashes of 660F \/ 350C. \u003cstrong\u003eNot recommended for direct contact with heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose an overwrap with a diameter that is a smaller size than required foryour application. For a more flexible\/loose fit select an overwrap with a diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003eIf the hose overwrap is notcut correctly it can fray. To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron witha sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the wire overwrap. While the end is cooling you can flare it using a small cone-shaped object to hold it open. Once the overwrap is cut to size simply open up the sleeve overthe cable and finish it off with either heat shrink or Aeroflow hose end finishers for that professional look.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295725846755,"sku":"AF91-9901","price":19.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-9901.jpg?v=1688016025"},{"product_id":"aeroflow-heatguard-heat-shield-sleeves-8","title":"Aeroflow Heatguard Heat Shield Sleeves (AF91-2002)","description":"\u003cp\u003eAEROFLOW HEAT GUARD 1-1\/2\" ID\u003c\/p\u003e\u003cp\u003e1-1\/2\" (38.1mm) I.D., Suits -12, -16, -20 Hoses, 3.7m length, Black\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-2002\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eAeroflow Heat Guard heat shield is engineered to protect hoses, cables and wireharnesses from damage due to exposure to extreme heat, openflame, molten splash and welding sparks. It resists allautomotive chemicals and solvents, and provides a substantial level of abrasion and puncture protection.\u003c\/p\u003e \u003cp\u003eMade with a thick, high temperature resist fiberglass sleeve that is jacketed with anon-permeable, heavy duty black silicone coating. This silicone jacketed fiberglass sleeving is the choice of professionals in racing and other industries where protection from constant high temperatures is mandatory. These heat sleeves are flame resistant, and can be exposed to constant heat of up to 260C(500F) with splashes of moltenmaterials with temperatures ofup to 1100C (2000F). \u003cstrong\u003eIt is not recommended for direct contact with any heat source.\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIt is recommended for a tight fit choose a heat sleevediameter that is a smaller size than required for your application. For a more flexible\/loose fit select a heat sleeve diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eWarning\u003c\/strong\u003e glass fibres can cause irritation to sensitive skin always use correct personal protection equipment when handling this product.\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295727845603,"sku":"AF91-2002","price":269.6,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-2002.jpg?v=1688016035"},{"product_id":"aeroflow-titainium-wastegate-bag","title":"Aeroflow Titainium Wastegate Bag (AF91-8038)","description":"\u003cp\u003e38mm WASTEGATE BAG TITANIUM\u003c\/p\u003e\u003cp\u003eSuit 38mm Wastegate\u003c\/p\u003e\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: AF91-8038\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cdiv class=\"product attribute description\"\u003e \u003cdiv class=\"value description\"\u003e \u003cp\u003eThe Aeroflow Performance external wastegate bag \/ blanket range provides high quality material selection, design, and construction, whilst at an affordable price.These wastegate bags are designed to help minimize the heat soak transfer between themain body and actuator body ofthe wastegate. This will allowa more stable operation of thewastegate valve allowing consistent performance of the turbocharger. The added benefit from these bags will prevent the heat from damagingcomponents surrounding the external wastegates such as wiring and hoses. Will suit Aeroflow External Wastegates. May also suit other brands. Available in two different options titanium and carbon..\u003c\/p\u003e \u003c\/div\u003e\n\u003c\/div\u003e","brand":"Aeroflow","offers":[{"title":"Default Title","offer_id":43295729909987,"sku":"AF91-8038","price":50.3,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/products\/AF91-8038.jpg?v=1688016051"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/0821\/9875\/collections\/cb6510c9e21c4c0e7112ba4f9a3e15c9.jpg?v=1688011771","url":"https:\/\/fastlanespares.co.nz\/collections\/insulation.oembed?page=8","provider":"Fast Lane Spares","version":"1.0","type":"link"}